electricwestern.com

July 20, 2008

Introducing: The Electric Western Phantastron VCO

Filed under: Researcch and News, Uncategorized — LorinParker @ 10:11 pm

INTRODUCING: The Electric Western PHANTASTRON!

The Electric Western Phantastron is an amazing, new, all-tube synth VCO with capabilities for waveshaping and crazy effects

if you don’t want the details, just listen to the MP3 samples here (recorded direct line in, no effects).

Electric Western Phantastron Sample One - Square / Ramp wave generated at the plate. First controlled by a CV envelope (just a dc signal ramping up and down slowly), then synced with a sawtooth and tweaked.

Electric Western Phantastron Sample Two – Pulse wave output from the screen. First controlled by an envelope CV, then connected to an LFO and "knob tweaked". When synced to a high source, you can hear it locking and unlocking with the octave and other partials…

I can’t wait to Sing and Plug the drum machine into this thing. It will pulse and sync with anything!

Try and get a chunk of silicon and an led to do that!

Details:

The majority of the instrument is based on a classic pentode circuit, "The Phantastron" — No kidding, that’s what it’s really called. For more info on that I’ll send you to find some good books on vacuum tube computing or radar timing (try teh 1946 Cruft Labs book from Harvard, it’s one of my faves)…

Nerd Talk:

The phantastron takes a sharp timing pulse from a gas thyratron and integrates and differentiates it between its grids. The suppressor grid acts as input, creating a drop between suppressor and plate, then the screen grid grabs some of electrons from the pulse (creating a sort of rounded pulse). The control grid, meanwhile, which is held high, above the low-biased cathode charges more slowly, introducing a very steady voltage ramp between the plate and cathode. I’m kind of oversimplifying here, maybe badly, but you get the picture.

The 5 unique points within the pentode all react differently to an incoming pulse, and generate different waves for each pulse. A sort of square, a very linear saw, and some very interesting asymetrical pulses. The pentode itself also acts as a bit of a tank and resonates the waveforms, creating some filtering, ringing and sync possibilities.

To alter the Phantastron to musical usage, I had to do some serious tweaking… Not many precedents apply to audio-rate signals (although Leon Theremin {Lev Termen} is rumored to have used the phantastron circuit as a basis in his "terpsitone".

Regardless, this module REALLY sings. There are soooo many tonal possibilities. Plus, the inputs and outputs interface very well with existing analog modulars, audio signals and CV driven equipment. It also functions alone as it’s own instrument and could be hooked to far more sensors and controllers than just a knob… Or you could simply play drums or guitar through it and process your music in this unique way.

This will be the first kit that Electric Western offers to the public. So enjoy, and look forward to making and tweaking your own very soon.

This is a very special circuit and remind me of the old days playing with HeathKits in the basement. I’m very glad that I can offer this experience to you. It’s a great way to learn about tubes, synthesis and extra-super-old-school synth-brewing.

Lorin

.

Powered by Qumana

July 11, 2008

Toshiba Motor Controller IGBTs from Honda EV+

Filed under: Researcch and News, Uncategorized — LorinParker @ 7:40 pm

Okay, so here are some pics of the water cooled motor control module I obtained from a Honda EV+.

The IGBT modules underneath the capacitor packs are MG600J2YS59. Here’s a datasheet for the newer model, MG600J2Y60, which should be similar. Ill try and track down the exact model datasheet when I have a chance.

Meanwhile, does anybody have any insights on these modules? If you do, email me

The Pics:

Powered by Qumana

A new EV begins

Filed under: Uncategorized — LorinParker @ 6:16 pm

Sarah and I are converting a conventional car into an electric vehicle (ev).

Why? Simply because it is beneficial, and because we can do it. By making our own EV, we are improving our lives, having fun, making something, and removing a polluting vehicle. No, it isn’t perfect, but it’s beneficial right now – and on an artist / professor salary….

Furthermore, with our access to surplus materials, creativity and smart folks, we can (hopefully) make an EV that is more affordable than typical conversions.

I’ll post technical considerations later — there are a lot, and I have plenty of ideas and opinons. However, AC vs. DC, range, cooling, accelleration are small points compared to our goal:

To make, own and use a zero emission vehicle cheaply.

The 1984 VW Rabbit that will serve as the chassis of our EV…

Powered by Qumana

Powered by WordPress